Unless otherwise specified, each Theory Saber comes with one of two different types of blades, both of which are available in a variety of sizes.
A saber is only as good as its toolkit, which is why each Theory Saber comes with everything you need to maintain your saber and forge your destiny.
The heart and soul of your saber, the board is what powers the lights and sounds that bring your legend to life.
The finest hilts in the galaxy, each is meticulously crafted and intentionally designed to be your gateway to another world as you hold it in your hand.
Switch the pixel number between 82cm and 92cm when the power is off by clicking the button three times.
* Wake up: Hold the button until the button light is on, then it will enter the standby mode
* Turn on: Tap the button.
* Adjust volume-3mode: Hold the button until the breath light flashes once, then release.
* Switch boot effect: Hold the button until the breath light flashes twice (or two seconds), then release.
* Switch the blade effects: Hold the button until the breath light flashes three times (or three seconds), then release.
* Switch sound fonts: Hold the button until the breath light flashes Four times (or four seconds), then release.
* Power saving mode: Hold the button until the breathing light is off or until power off sound (or when idle for 10 minutes)
* Blaster: Tap the button.
* Lock-up: Hold the button until the breath light flashes once, then release.
* Color change: Hold the button until the breath light flashes twice then release
* FOC off/on: Hold the button until the breath light flashes Three times, then release.
* Turn off: Hold the button until the breath light flashes Four times, then release.
* Turn on: Twist the saber.
* Switch Sound fonts: when the blade is up, Hold the button, then twist the saber.
* Switch BGM: when the blade is down, Hold the button, then twist the saber.
* Turn off: Twist the saber.
* Switch the blade color: when the blade is down, Hold the button, then twist the saber.
* Force: when the blade is up, Hold the button, then twist the saber.
* FOC: Hit the saber.
* Drag: Hold the button, then hit the saber.
* Melt: Hold the button, then thrust the saber.
You can switch the pixel number between 82cm and 92cm when the power is off by clicking the main button six times.
* Turn on: Tap the PWR.
* Switch Sound fonts: Tap the AUX.
* Enter volume mode: Tap the PWR and AUX simultaneously. Then tap the PWR to increase the volume, and tap the AUX to decrease the volume. No put
* Exit volume mode: Tap the PWR and AUX at the same time
* Switch boot effect: Hold PWR for one second, then release. Switch blade effects: Hold AUX for one second, then release.
* Power saving mode: No operation for 10 minutes.
* Turn off: Click AUX three times.
* Turn off: Tap PWR.
* Blaster: Tap AUX.
* Lock-up: Hold AUX for one second, then release.
* FOC off/on: Tap PWR and AUX at the same time.
* Turn on: Twist the saber.
* Switch BGM: When the blade is down, Hold AUX, then twist the saber.
* Switch Sound Fonts: When the blade is up, Hold AUX, then twist the saber.
* Turn off: Twist the saber.
* Switch the blade color: When the blade is down, Hold AUX, then twist the saber.
* Force: When the blade is up, Hold AUX, then twist the saber.
* Drag: Hold PWR, then hit the saber.
* Melt: Hold AUX, then thrust the saber.
* FOC: Hit the saber
1. “Battle Mode” - triple-click and hold while the blade is ON to toggle mode ON/OFF.
2. Ignite (ON) - short click while OFF
3. Muted Ignition (ON) - double click and hold while OFF
4. Retract (OFF) - hold and wait till the blade is off while ON
1. Play/Stop Music - double click while OFF
2. Enter/Exit Volume Menu - Menu hold+clash while off
3. Volume DOWN/UP - hold and release while in Volume Menu /click while in Volume Menu
4. Next Preset - hold and release while OFF
5. Previous Preset - hold and wait while OFF
1. Blast - short click while ON
2. Multi-Blast Mode - swing + hold the button for 1 second and release while ON. To EXIT Multi-Block mode, short click while ON
3. Clash - clash blade while ON.
In Battle Mode, clash and pull away quickly for "Clash" (requires BEGIN LOCKUP and END LOCKUP styles).
4. Lock up - hold + hit clash while ON
5. Drag - Hold + hit clash while ON pointing the blade tip down
6. Melt - Hold +thrust forward clash while ON
7. Lightning Block - double click and hold the button while ON
8. Force - hold +twist the hilt while on (While pointing up)
9. Stab - thrust forward clash while on
1. Enter Color Change mode - hold+twist the hilt while
ON (pointing down)
2. Confirm the selected color - hold the button until the confirmation sound
3. Battery Level - triple click while off
1. "Battle Mode" - hold AUX and Swing while the blade is ON to toggle mode ON/OFF.
2. Ignite (ON) - click PWR or Twist On while OFF.
3. Muted Ignition (ON) - double-click PWR while OFF.
4. Retract (OFF) - click PWR or TWIST HILT while ON (disabled during swinging)
1. Play Music Track - hold and release PWR while OFF, and hold and release PWR with the blade pointing straight up while ON.
2. Silent mode - double-click the PWR to mute the saber while OFF.
3. Adjust volume - hold the PWR/AUX meanwhile to enter/exit the volume adjustment mode after hearing a
"di" sound, click PWR to turn up the volume, click AUX to turn down the volume while OFF
4. Change Soundfonts
Previous Preset - click AUX while OFF (pointing down)
Next Preset - click AUX while OFF (parallel or up)
1. Blast - click AUX while ON.
2. Multi-Blast Mode - hold and release AUX while ON to enter mode, Swing to initiate Blasts, and click Aux to exit mode. Lock up, clash, stab, melt, drag, or any button press automatically exits mode.
3. Clash - clash blade while ON.
in Battle Mode clash, pull away quickly for "Clash" (requires BEGIN LOCKUP and END LOCKUP styles).
4. Lock up - hold AUX and clash while ON. in Battle Mode clash and hold steady to activate, pull away to disengage.
5. Drag - hold AUX and stab down while ON. in Battle Mode stab down, pull away to disengage.
6. Melt - hold PWR (or AUX) and thrust forward and clash while ON in Battle Mode thrust and clash to engage, pull away to disengage.
7. Lightning Block - hold PWR and click AUX while ON.
8. Force - hold and release PWR while ON.
9. Stab - thrust forward and clash blade while ON - deactivated in.
1. Power Save - hold Aux and click PWR while ON (pointing up) to use Power Save (requires style).
2. Color Change - hold AUX and click PWR while ON (parallel or down) to enter CCWheel, turn the hilt to rotate through colors, click PWR to select/exit if using COLOR_CHANGE_DIRECT each button, then press advances one Color at a time.
